LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Entry Lights Control System >> Ignition Key Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Key Switch Test

  1. Remove the steering column upper and lower covers (see SIDE DEFOGGER VENT TRIM REMOVAL/INSTALLATION ).
  2. Disconnect the 6P connector (A).
    Fig 1: Identifying Ignition Key Switch & 6P Connector
    G05960050Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between terminals No. 1 and No. 2.
    • There should be continuity with the key in the ignition switch.
    • There should be no continuity with the key removed.
  4. If the continuity is not as specified; replace the ignition switch.