LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Insight LX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> EVAP System >> EVAP Canister Purge Valve Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

EVAP Canister Purge Valve Replacement

  1. Disconnect the MAP sensor 3P connector (A) (see KNOCK SENSOR REPLACEMENT ), the MAF sensor/IAT sensor 5P connector (B) (see MAF SENSOR/IAT SENSOR REPLACEMENT ), and the EVAP canister purge valve connector (C), then remove the harness holder (D).
    Fig 1: MAP Sensor 3P, EVAP Canister Purge Valve Connectors And EVAP Canister Purge Guard With Torque Specifications
    G08092663Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the hose (E), then remove the EVAP canister purge guard (F), and the canister purge valve (G).
  3. Install the parts in the reverse order of removal with a new O-ring (H).
scientia non olet · About LEMON Manuals