Power Mirror Control Unit Connector for Inputs and Outputs
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Power Mirror Control Unit 24P Connector (female terminals)
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 1 | IG1 METER | IG1 power source | With the vehicle in the ON or START mode: about battery voltage |
| 2 | R/C MIRR MTR (R-MVCC) | Outputs R/C MIRR MTR (R-MVCC) signal | When power mirror control unit is wakeup mode: about 5 V |
| 3 | DR MIRROR UD | Detects DR MIRROR UD signal | With the vehicle in the ON mode: about 0 V or 5 V (depending on power mirror switch position) |
| 4 | MIRROR L COM | Detects MIRROR L COM signal | With power mirror selector switch in R position: less than 0.2 V |
| 5 | AS MIRROR LR | Detects AS MIRROR LR signal | With power mirror selector switch in R position: less than 0.2 V |
| 6 | MIRROR SEL | Detects MIRROR SEL signal | With power mirror selector switch in L position: less than 0.2 V |
| 7 | R/C MIRROR MTR (R-SGND) | Detects R/C MIRROR MTR (R-SGND) signal | Less than 0.2 V at all times |
| 8 | SEV | Detects SEV signal | About 0-5 V (depending on power mirror vertical position) |
| 9 | SEH | Detects SEH signal | About 0-5 V (depending on power mirror horizontal position) |
| 10 | R/C MIRR MTR (R-UD) | Drives right power mirror actuator (UP) | With right power mirror actuator tilt UP: about battery voltage With right power mirror actuator tilt DOWN: less than 0.2 V |
| 11 | MIRROR L LR | Detects MIRROR L LR signal | With power mirror selector switch in L position: less than 0.2 V |
| 12 | DR MIRROR UD | Detects DR MIRROR UD signal | With power mirror selector switch in L position: less than 0.2 V |
| 13 | +B BACK UP | Power source for power mirror control unit | About battery voltage at all times |
| 14 | Not used | --- | --- |
| 15 | P/W DR MTR SGND | Ground for power mirror control unit | Less than 0.2 V at all times |
| 16 | MIRROR SER | Detects MIRROR SER signal | With power mirror selector switch in R position: less than 0.2 V |
| 17 | AS MIRROR HLSE | Detects AS MIRROR HLSE signal | About 0-5 V (depending on power mirror horizontal position) |
| 18 | R/C MIRR MTR (R-MV) | Detects R/C MIRR MTR (R-MV) signal | About 0-5 V (depending on power mirror vertical position) |
| 19 | MIRROR R LR | Drives right power mirror actuator (RIGHT) | With right power mirror actuator swing RIGHT: about battery voltage With right power mirror actuator swing LEFT: less than 0.2 V |
| 20 | MIRROR R COM | Drives right power mirror actuator (DOWN/LEFT) | With right power mirror actuator swing RIGHT or tilt UP: less than 0.2 V With right power mirror actuator swing LEFT or tilt DOWN: about battery voltage |
| 21 | MH | Drives left power mirror actuator (RIGHT) | With left power mirror actuator swing RIGHT: about battery voltage With left power mirror actuator swing LEFT: less than 0.2 V |
| 22 | DR MIRROR COM | Drives left power mirror actuator (UP/LEFT) | With left power mirror actuator swing RIGHT or tilt DOWN: less than 0.2 V With left power mirror actuator swing LEFT or tilt UP: about battery voltage |
| 23 | MV | Drives left power mirror actuator (DOWN) | With left power mirror actuator tilt DOWN: about battery voltage With left power mirror actuator tilt UP: less than 0.2 V |
| 24 | LIN (P/W) | Communication line | --- |