Driving Position Memory Clear: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Honda Odyssey, 2024 Honda Odyssey, 2023 Honda Odyssey, 2022 Honda Odyssey, and 2021 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Clear the driving position memory after doing any of the following actions:

Power seat motor test or replacement.
Substituting a known-good power seat control unit.

NOTE: The memory for position 1 and 2 are stored in the power seat control unit. If the driving position memory is cleared, the memory stored in the power seat control unit is cleared.

Driving Position Memory - Clear
1. Turn the vehicle to the OFF (LOCK) mode.

Courtesy of HONDA, U.S.A., INC.

2. Press and hold the SET button of the driving position memory switch.

3. Turn the vehicle to the ON mode.

4. Release the SET button of the driving position memory switch.

5. Repeat steps 1-4 three more times.
NOTE:
- Once the memory is successfully cleared, the driving position memory switch indicator 1 and 2 turn on for 3 seconds.
- If the indicators did not turn on, go back to step 1 and repeat the procedure.