LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Odyssey Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6-Speed >> Line Pressure Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Line Pressure Switch Replacement

  1. Remove the air intake scoop (see step  5 ).
  2. Do the battery removal procedure (see BATTERY REMOVAL AND INSTALLATION ).
  3. Remove the air cleaner (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT ).
  4. Remove the intake air duct (see step  10 ).
  5. Remove the main under-hood fuse box (see step  11 ).
  6. Remove the battery base (see step  12 ).
  7. Disconnect the line pressure switch connector, and remove the line pressure switch (A) and the sealing washer (B).
    Fig 1: Locating Line Pressure Switch And Sealing Washer With Torque Specifications
    G06969082Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Install a new line pressure switch with a new sealing washer, and tighten the switch.
  9. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.
  10. Install the battery base (see step  58 ).
  11. Install the main under-hood fuse box (see step  59 ).
  12. Install the intake air duct (see step  60 ).
  13. Install the air cleaner (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT ).
  14. Do the battery installation procedure (see BATTERY REMOVAL AND INSTALLATION ).
  15. Install the air intake scoop (see step  66 ).
scientia non olet · About LEMON Manuals