Switch Test/Replacement

Remove the dashboard center lower cover (see DASHBOARD CENTER LOWER COVER REMOVAL/INSTALLATION ).
Remove the two screws and the switch (A).

Fig 1: Switch And Illumination Bulbs With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Terminals Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity check is not as specified, replace the illumination bulbs (B) or the switch.
Install the switch in the reverse order of removal.