October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Under-dash Fuse/Relay Box: Removal
- Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION
) and wait at least 3 minutes.
- Remove the left front door sill trim and left kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS
).
- Disconnect the connectors from the fuse side of the under-dash fuse/relay box (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two mounting bolts and pull the fuse/relay box away from the body.
- Disconnect the connectors and remove the under-dash fuse/relay box.
- If replacing the fuse/relay box, carefully remove the relays by using the relay puller.
NOTE:
Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.