Passenger's Power Window Motor Test

Remove the passenger's power window switch (see POWER WINDOW MASTER SWITCH REPLACEMENT ).
Test the motor in each direction by connecting battery power and ground to the passenger's power window switch 8P connector according to the table.

Fig 1: Passenger's Power Window Motor Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Testing Motor In Each Direction By Connecting Battery Power And Ground To Passenger's Power Window Switch 8P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, go to step 4.
Remove the passenger's door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the passenger's power window motor (B).

Fig 3: Identifying Passenger's Power Window Motor With 2P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Check for continuity between the passenger's power window switch 8P connector terminals and the passenger's power window motor 2P connector terminals as shown.

POWER WINDOW CONNECTOR REFERENCE CHART

Passenger's power window switch 8P connector	Passenger's power window motor 2P connector
4	1
5	2

Fig 4: Checking Continuity Between Passenger's Power Window Switch 8P And Motor 2P Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

If the wire harness is OK, replace the passenger's power window motor (see POWER WINDOW MOTOR REMOVAL AND INSTALLATION ).