When Replacing An IMA Battery Update The Software (14-035)
Publication date: 2014-07-11Reference number: 14-035
WHEN REPLACING AN IMA BATTERY UPDATE THE SOFTWARE
TECHNICAL SERVICE BULLETIN
| HONDA: | 2012-2013 Civic hybrid; 2013 CR-Z |
AFFECTED VEHICLES
| Year | Model | Trim | VIN Range |
|---|---|---|---|
| 2012-2013 | Civic hybrid | ALL | ALL |
| 2013 | CR-Z | ALL | ALL |
BACKGROUND
A new replacement IMA battery will require an update to the IMA battery software. If the IMA battery is being replaced on the affected models, please check and install the latest version of the IMA battery software as needed.
SOFTWARE INFORMATION
MVCI Control Module (CM) Update:
Application (FW) Version: 3.01.37 or later
Database Update: 03 Mar-2014 or later
HDS Software Version:
3.013.014 or later
Before beginning the repair, make sure that both the HDS and the MVCI are updated as listed above.
Do only the update listed in this service bulletin.
Check that the MVCI indicates the applicable program ID listed below (or a later program ID) as the Recommended Update when the update begins.
If the MVCI displays this vehicle does not need an update at this time during the update, check if the MVCI Control Module update application is correct as shown above. If the software is correct, the MVCI software has been updated. If the software is not correct, update both the MVCI and the HDS software.
For more information about updating the HDS, the MVCI, and vehicle systems, refer to Service Bulletin 01-023 , Updating Control Units/Modules .
| Year/Model | Program ID (or later) | Program P/N (or later) | System to Update |
|---|---|---|---|
| 2012-13 Civic | YEA770 | 1D100-RW0-C05RM | IMA Battery Module |
| 2013 CR-Z | YEA770 | 1D100-RTW-C05RM | IMA Battery Module |
WARRANTY CLAIM INFORMATION
None. Refer to the specific service bulletin for the symptom you are repairing.
REPAIR PROCEDURE
After replacing the IMA battery, update the IMA battery module software.
Refer to Service Bulletin 01-023 , Updating Control Units/Modules.