DTC U0302: PGM-FI System and A/T System Program Mismatch
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review the General Troubleshooting Information (see General Troubleshooting Information ).
- This code is indicated when PCM updating is incomplete.
- Do not turn the ignition switch to LOCK (0) or ACCESSORY (I) while updating the PCM. If you turn the ignition switch to LOCK (0) or ACCESSORY (I) before completion, the PCM can be damaged.
- Update the PCM (A/T system), (see ECM/PCM UPDATE ).
- Check for Pending or Confirmed DTCs with the HDS.
Is DTC U0302 indicated?
YES - Replace the original PCM (see ECM/PCM REPLACEMENT ).
NO - Troubleshooting is complete.