LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> CR-Z Base, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Humidity/In-Car Temperature Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Humidity/In-Car Temperature Sensor Replacement

  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Remove the aspirator air hose (A) from the humidity/in-car temperature sensor (B), and disconnect the connector (C).
    Fig 1: Identifying Aspirator Air Hose, Humidity/In-Car Temperature Sensor And Connector
    G06953763Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the self-tapping screw and humidity/in-car temperature sensor from the humidity/in-car temperature sensor trim (D).
  4. Install the sensor in the reverse order of removal. Be sure to connect the aspirator air hose securely.
scientia non olet · About LEMON Manuals