Immobilizer code is not identified:
WARNING: This page is about a different variant/trim than selected.
When turning the vehicle to the ON mode when the immobilizer code has not been identified, the immobilizer indicator will come on for 2 seconds, then blink until the vehicle to the OFF (LOCK) mode is selected. The state of the keyless registration and the S-NET line can be checked by doing a system check and a status log check with the HDS.
When in the vehicle to the OFF (LOCK) mode, the immobilizer indicator will blink 10 times to signal that until it has been reset correctly, the immobilizer indicator will remain off.