AUDIO UNIT CONNECTOR E (14P) (Without navigation)

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Audio Unit Connector E (14P) (Without Navigation)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

CONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHARTCONNECTOR PINOUTS DESCRIPTION CHART

Cavity

Wire

Connects to

ORN

USB adapter unit (+B)

BLU

USB adapter unit (SYS ACC)

GRY⁽¹⁾

Shield for terminals No. 9 and No. 10 (GA-NET BUS SH)

PNK⁽¹⁾

Shield for terminals No. 5, No. 6, No. 13, and No. 14 (AUDIO SH)

BRN

USB adapter unit (AUDIO R +)

WHT

USB adapter unit (AUDIO L+)

YEL

USB adapter unit (GA-NET BUS+)

E10

GRN

USB adapter unit (GA-NET BUS-)

E11

BLK

USB adapter unit (GND)

E13

RED

USB adapter unit (AUDIO R-)

E14

LT BLU

USB adapter unit (AUDIO L-)

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.