AUDIO UNIT CONNECTOR E (14P) (with USB adapter control unit)

Fig 1: Identifying Audio Unit Connector E (14P) (With USB Adapter Control Unit)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity	Wire Color	Terminal Name	Description
E1	ORN	+ B	Power source for USB adapter control unit
E2	BLU	SYS ON	Outputs signal for USB adapter control unit switching ON/OFF
E3	GRY(1)	GA-NET BUS SH	Shield for terminals No. 9 and No. 10
E4	GRY(1)	AUDIO SH	Shield for terminals No. 5, No. 6, No. 13, and No. 14
E5	BLK	AUDIO R +	Inputs sound signal from GA-Net related unit(s)
E6	WHT	AUDIO L+	Inputs sound signal from GA-Net related unit(s)
E9	YEL	GA-NET BUS+	GA-Net bus communication signal
E10	BRN	GA-NET BUS-	GA-Net bus communication signal
E11	BLK	GND	Ground for USB adapter control unit
E13	RED	AUDIO R-	Inputs sound signal from GA-Net related unit(s)
E14	GRN	AUDIO L-	Inputs sound signal from GA-Net related unit(s)
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.