April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rearview Camera Inputs and Outputs

Fig 1: Identifying Rearview Camera 6P Connector

G08095081

Courtesy of AMERICAN HONDA MOTOR CO., INC.

REARVIEW CAMERA 6P CONNECTOR

Terminal Number

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

1

GRN

VCC (VCC supply)

Power source for rearview camera

8V

If open: No rearview camera image.
If short to ground: When put into reverse, the navigation screen goes black (display backlight still operative).

2

WHT

GND(RC) (Ground)

Ground for rearview camera

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

3

RED

CAMERA GND (Ground camera)

Ground for camera signal

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

4

BLK

CAMERA V (Video camera)

Video signal for rearview camera

0.3 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

5

GRY⁽¹⁾

CAMERA SH (Shield camera)

Shield for terminals No. 1, No. 2, No. 3, and No. 4

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

6

BRN

CAMERA ADPT (Adaptive camera)

Control signal for rearview camera

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

⁽¹⁾	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.