October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Pulsation Damper Replacement
- Remove the fuel rail (see
INJECTOR REPLACEMENT
).
- Place a wrench (A) on the fuel rail (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Place second wrench (C) on the fuel pulsation damper (D).
- Remove the pulsation damper by holding the first wrench while turning the second wrench.
- Install the fuel pulsation damper in the reverse order of removal with new washers.
NOTE:
- Replace all washers whenever the fuel pulsation damper is loosened or removed.
- If the drain hole (A) of the fuel pulsation damper cover does not face down, reinstall it as shown.
Courtesy of AMERICAN HONDA MOTOR CO., INC.