Idle Stop Switch Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
Disconnect the idle stop switch connector (A).

Fig 1: Connector, Locknut With Torque Specifications, And Idle Stop Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Loosen the locknut (B), and remove the idle stop switch (C).
Install the parts in the reverse order of removal.
Adjust the idle stop switch (see IDLE STOP SWITCH ADJUSTMENT ).