Connecting Rod Bolt Inspection

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Measure the diameter of each connecting rod bolt at point A and point B with a micrometer.

Fig 1: Measuring Diameter Of Connecting Rod Bolt
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Calculate the difference in diameter between point A and point B.
Point A-Point B = Difference in Diameter

Difference in Diameter:

Specification: 0-0.05 mm (0-0.002 in)
If the difference in diameter is out of tolerance, replace the connecting rod bolt.