LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2013 >> Insight Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT >> CVTF Temperature Sensor Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

CVTF Temperature Sensor Test

  1. Remove the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the solenoid harness 8P connector.
    Fig 1: Identifying Solenoid Harness 8P Connector Terminals
    G08093123Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Measure CVTF temperature sensor resistance between the solenoid harness 8P connector terminals No. 6 and No. 7.

    Standard: 50 Ω-25 kΩ 

  4. If the resistance is out of standard, replace the CVTF temperature sensor (see CVTF TEMPERATURE SENSOR REPLACEMENT ).
  5. Connect the connector securely.
  6. Install the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals