DTC P16C0: PCM A/T Control System Incomplete Update
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review GENERAL TROUBLESHOOTING INFORMATION .
- This code is indicated when PCM updating is incomplete.
- Do not turn the ignition switch to LOCK (0) or ACCESSORY (I), while updating the PCM. If you do before completion, the PCM can be damaged.
- Update the PCM (see PCM UPDATE ).
- Check for Pending or Confirmed DTCs with the HDS.
Is DTC P16C0 indicated?
YES -Replace the PCM (see PCM REPLACEMENT ).
NO -PCM updating is complete.