Audio Disc Changer Connector for Inputs and Outputs (With Navigation System)

Fig 1: Identifying Audio Disc Changer Connector B (14P) And Audio Disc Changer Connector A (18P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Audio Disc Changer Connector A (18P) 

Fig 2: Identifying Audio Disc Changer Connector A (18P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE SPECIFICATION

Cavity	Wire	Terminal Name	Connects to
A1	WHT	AUDIO L-	Audio unit
A2	RED	AUDIO R-	Audio unit
A3	GRN	GA-NET ILL CTRL	Audio unit
A4	GRN/RED	CD EJECT	Navigation display unit
A5	RED/BLU	AUDIO BUS+	Audio unit
A6	PUR	SYSTEM ACC	Audio unit
A7	YEL	+B GA-NET 1	Audio unit
A8	YEL	SECURITY OUT	Navigation display unit
A9	GRN	AUDIO L+	Audio unit
A10	BLK	AUDIO R+	Audio unit
A11	GRY(1)	AUDIO SHIELD	Shield for terminals No. 1, No. 2, No. 9, and No. 10
A12	GRN	DISC OPEN	Navigation display unit
A13	GRN/RED	GA-NET GND	Audio unit
A14	GRY(1)	AUDIO BUS 1 (GA-NET) SHIELD	Shield for terminals No. 5 and No. 15
A15	YEL	AUDIO BUS- (GA-NET)	Audio unit
A16	GRN/BLK	GA-NET ILL+	Audio unit
A17	BLU	+B GA-NET2	Audio unit
A18	RED/WHT	SECURITY IN	Multiplex integrated control unit (MICU)
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

Audio Disc Changer Connector B (14P) 

Fig 3: Audio Disc Changer Connector B (14P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE SPECIFICATION

Cavity	Wire	Terminal Name	Connects to
B2	ORN	SYS ON	XM receiver
B3	GRY(1)	GA-NET BUS SH	Shield for terminals No. 9 and No. 10
B4	GRY(1)	AUDIO SH	Shield for terminals No. 5, No. 6, No. 13, and No. 14
B5	WHT	AUDIO R+	XM receiver
B6	RED	AUDIO L+	XM receiver
B9	WHT	GA-NET BUS+	Navigation display unit
BIO	BLU/RED	GA-NET BUS-	Navigation display unit
B13	BLK	AUDIO R-	XM receiver
B14	GRN	AUDIO L-	XM receiver
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.