LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2015 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> Oil Filter Feed Pipe Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Filter Feed Pipe Replacement

  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
  2. Remove the oil filter feed pipe.
    Fig 1: Identifying Oil Filter Feed Pipe
    G06949582Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
    Fig 2: Identifying Nut
    G06949583Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 39 N.m (4.0 kgf.m, 29 lbf.ft), then remove the nuts from the oil filter feed pipe.
  5. Install the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
scientia non olet · About LEMON Manuals