Intake Manifold Removal and Installation: Removal

NOTE:  Refer to the Exploded View above if needed during this procedure.

1. Air Cleaner - Remove 
2. Throttle Body - Remove

   Courtesy of HONDA, U.S.A., INC.

   NOTE:  Do not disconnect the water bypass hoses.

3. Intake Manifold External Item - Remove

   Courtesy of HONDA, U.S.A., INC.

   1. Remove the harness clamps (A) 2. Disconnect the EVAP canister purge valve hose (B) and the PCV hose (C) 3. Disconnect the connectors (D) 4. Remove the intake manifold bracket (E).

   Courtesy of HONDA, U.S.A., INC.

   5. Disconnect the brake booster vacuum hose (A).

4. Intake Manifold - Remove

   Courtesy of HONDA, U.S.A., INC.