LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2015 >> Pilot LX, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System >> Washer Fluid Level Switch Test >> With Washer Fluid Level Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Washer Fluid Level Switch

  1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector (A) from the washer fluid level switch.
    Fig 1: Identifying 2P Connector
    G08089087Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the washer fluid level switch from the washer reservoir.
    NOTE: Fluid may flow out of the opening.
  4. Check for continuity between terminals No. 1 and No. 2 in each float position.
    • There should be continuity when the float is down.
    • There should be no continuity when the float is up.
  5. If the continuity is not as specified, replace the switch.