Removal & Installation

NOTE:  If the keyless access control unit is replaced, do the keyless access registration. If the original keyless access control unit is installed, confirm that all systems work properly.

• 1. Glove Box - Remove
• 2. Bracket with the Control Units - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Remove the bracket (A) with the control unit

  2. Disconnect the connectors.

• 3. Keyless Access Control Unit - Remove

  Courtesy of HONDA, U.S.A., INC.

  1. Remove the keyless access control unit (A) from the bracket (B).

• 4. All Removed Parts - Install the parts in the reverse order of removal.
• 5. Keyless Access System - Registration