DTC U3000-51 (91-01): Control Module Programming Error

NOTE:  Before you troubleshoot, Refer to: HOW TO TROUBLESHOOT THE REAL TIME AWD SYSTEM (AWD) .

DTC (Real Time AWD)

1. Problem verification

   - 1. Turn the vehicle to the ON mode.

   - 2. Update the real time AWD control unit if it does not have the latest software.

   - 3. Clear the DTC with the HDS.

   - 4. Start the engine.

   - 5. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   U3000-51: Control Module Programming Error

   Is DTC U3000-51 indicated?

   YES 

   Update the real time AWD control unit if it does not have the latest software , or substitute a known-good real time AWD control unit , and recheck. If the symptom/indication goes away with the updated real time AWD control unit, troubleshooting is complete. If the symptom/indication goes away with a known-good real time AWD control unit, replace the original real time AWD control unit .

   NO 

   Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.