Driving Position Memory System Description - Control/Function

Memorizing a Seat and Mirror Position 

Turn the vehicle to the ON mode, and then move the seat to the desired position. Press and hold the SET button on the driving position memory switch. A single beep will be heard and both of the green LED will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat positions have been memorized. The LED will remain lit, unless the seat is moved from the memorized position.

Memorized Position Recall with the Remotes 

After the seat positions have been memorized, the seat will move to backward 1.38 in (35 mm) from the memorized position, when the doors unlock and the driver's door is opened. When the seat move to the memorized position, after the vehicle is turned to the ON mode. The green LED corresponding with that remote will stay lit until the position is changed or the vehicle is turned to the OFF (LOCK) mode. The seat will move to backward 1.38 in (35 mm) from the memorized position, when turned to the vehicle OFF (LOCK) mode and the driver's door is opened.

Memorized Customized Setting Recall with the Remotes 

Customize setting are controlled independently by remotes (Driver 1 and Driver 2).