Immobilizer System Registration: Procedure
- 1. HDS DLC - Connect
- 2. Immobilizer-Keyless Control Unit - Registration
NOTE:
- The HDS is required for registration of the immobilizer keys.
- Programing the immobilizer also programs the keyless transmitter.
- Check for aftermarket electrical equipment that can cause problems with transponder operation.
- The immobilizer-keyless control unit can store up to six immobilizer keys.
1. Have all registered keys and the PCM code
2. Turn the vehicle to the ON mode
3. Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP
4. Select REPLACE IMMOBILIZER RECEIVER/KEYLESS CONTROL UNIT
5. Do the registration according to the instructions on the HDS screen.
NOTE: Program all of the customer's keys
6. Check if the engine can be started with the registered keys
7. When prompted by the HDS, do the keyless transmitter programming
8. Make sure the keyless transmitter's operation works properly.