Customize Function
How to Change the Set Temperature
The climate control unit has a function to change the set temperature +2.7 °F (+1.5 °C) or -2.7 °F (- 1.5 °C) degrees in case customers feel the temperature is too warm or too cold for the displayed temperature.
NOTE:
Verify that the climate control and A/C system is working properly before enabling the customize function to offset the set temperature.
- +2.7 °F (+1.5 °C) Change
- Set the driver's temperature to Hi and press the ON/OFF switch.
- Turn the vehicle to the OFF (LOCK) mode then while pressing the RECIRCULATION switch and A/C switch, turn the vehicle to the ON mode.
- Continue to press the RECIRCULATION switch and A/C switch for 10 seconds.
- After 10 seconds, the compensation value shall be updated and stored.
- -2.7 °F (- 1.5 °C) Change
- Set the driver's temperature to Lo and press the ON/OFF switch.
- Turn the vehicle to the OFF (LOCK) mode then while pressing the RECIRCULATION switch and A/C switch, turn the vehicle to the ON mode.
- Continue to press the RECIRCULATION switch and A/C switch for 10 seconds.
- After 10 seconds, the compensation value shall be updated and stored.
- Changing back to 0 °F (0 °C)
- Set the driver's temperature to any value except Hi or Lo and press the ON/OFF switch.
- Turn the vehicle to the OFF (LOCK) mode then while pressing the RECIRCULATION switch and A/C switch, turn the vehicle to the ON mode.
- Continue to press the RECIRCULATION switch and A/C switch for 10 seconds.
- After 10 seconds, the compensation value shall be updated and stored.
- Indication of the change
The climate control unit displays the following during each change.
- Displays nothing from the vehicle ON mode to 5 seconds.
- Blinks the current setting for the next 5 seconds.
- The display will indicate a Hi, Lo or 2 dashes depending on the set temperature change.