Audio-Navigation Unit Connector for Inputs and Outputs (2016 2017)
| Connector Index |
| Audio-Navigation Unit Connector A (24P) |
| Audio-Navigation Unit Connector B (20P) |
| Audio-Navigation Unit Connector C (24P) |
| Audio-Navigation Unit Connector D (12P) |
| Audio-Navigation Unit Connector E (3P) |
| Audio-Navigation Unit Connector F (5P) |
| Audio-Navigation Unit Connector G (5P) |
| Audio-Navigation Unit Connector H (20P) |
| Audio-Navigation Unit Connector J (2P) |
AUDIO-NAVIGATION UNIT CONNECTOR A (24P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| A1 |
GND |
Ground for audio-navigation unit (G404) |
| A2 |
Not used |
--- |
| A3 |
+B AUDIO |
Continuous power source |
| A4 |
Not used |
--- |
| A5 |
RL SPKR+ |
Outputs sound signal for left rear door speaker |
| A6 |
RL SPKR- |
Outputs sound signal for left rear door speaker |
| A7 |
Not used |
--- |
| A8 |
Not used |
--- |
| A9 |
RR SPKR+ |
Outputs sound signal for right rear door speaker |
| A10 |
RR SPKR- |
Outputs sound signal for right rear door speaker |
| A11 |
REMOTE SW GND |
Audio remote switch and HFL switch ground |
| A12 |
Not used |
--- |
| A13 |
K LINE |
Detects scan tool signal (serial data) |
| A14 |
Not used |
--- |
| A15 |
FL SPKR+ |
Outputs sound signal for driver's door speaker and left tweeter |
| A16 |
FL SPKR- |
Outputs sound signal for driver's door speaker and left tweeter |
| A17 |
Not used |
--- |
| A18 |
Not used |
--- |
| A19 |
FR SPKR+ |
Outputs sound signal for front passenger's door speaker and right tweeter |
| A20 |
FR SPKR- |
Outputs sound signal for front passenger's door speaker and right tweeter |
| A21 |
Not used |
--- |
| A22 |
AUDIO REMOTE SW |
Detects control signal from audio remote switch |
| A23 |
DISPLAY SW |
Detects control signal from audio remote switch |
| Cavity |
Terminal Name |
Description |
| A24 |
ACC |
Power source for accessories |
AUDIO-NAVIGATION UNIT CONNECTOR B (20P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| B1 |
Not used |
--- |
| B2 |
Not used |
--- |
| B3 |
B-CAN_L |
B-CAN bus communication signal |
| B4 |
Not used |
--- |
| B5 |
Not used |
--- |
| B6 |
Not used |
--- |
| B7 |
Not used |
--- |
| B8 |
Not used |
--- |
| B9 |
Not used |
--- |
| B10 |
Not used |
--- |
| B11 |
PARKING BRAKE SW |
Detects parking brake switch on signal |
| B12 |
HFT/NAVI REMOTE SW |
Detects control signal from HFL switch |
| B13 |
B-CAN_H |
B-CAN bus communication signal |
| B14 |
Not used |
--- |
| B15 |
Not used |
--- |
| B16 |
Not used |
--- |
| B17 |
Not used |
--- |
| B18 |
Not used |
--- |
| B19 |
Not used |
--- |
| B20 |
Not used |
--- |
AUDIO-NAVIGATION UNIT CONNECTOR C (24P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| C1 |
F-CAN_L |
F-CAN bus communication signal |
| C2 |
SH CAMERA |
Shield for terminals No. 3, No. 4, No. 15, and No. 16 |
| C3 |
CAMERA V GND |
Ground for video signal |
| Cavity |
Terminal Name |
Description |
| C4 |
CAMERA GND |
Ground for rear view camera for power source |
| C5 |
CAMERA BIT0 |
Mode select signal for rearview camera |
| C6 |
BSM SW |
LaneWatch on/off signal from LaneWatch switch |
| C7 |
BACK LT |
Detects reverse signal of select lever from reverse relay circuit |
| C8 |
BSM CAM VGND |
Ground for LaneWatch camera |
| C9 |
SH BSM CAM |
Shield for terminals No. 8, No. 20, No. 21, No. 22, and No. 23 |
| C10 |
Not used |
--- |
| C11 |
Not used |
--- |
| C12 |
Not used |
--- |
| C13 |
F-CAN_H |
F-CAN bus communication signal |
| C14 |
VSP |
Detects vehicle speed pulse from PCM |
| C15 |
CAMERA V |
Video signal for rearview camera |
| C16 |
CAMERA VCC |
Power source for rearview camera |
| C17 |
Not used |
--- |
| C18 |
CAMERA BIT1 |
Mode select signal for rearview camera |
| C19 |
CAMERA ADPT |
Detects connection for rearview camera |
| C20 |
BSM CAM VID |
Video signal for LaneWatch camera |
| C21 |
BSM CAM VCC |
Power source for LaneWatch camera |
| C22 |
UNIT TO LWC |
Communication signal for LaneWatch camera |
| C23 |
LWC TO UNIT |
Communication signal for LaneWatch camera |
| C24 |
Not used |
--- |
AUDIO-NAVIGATION UNIT CONNECTOR D (12P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| D1 |
GA BUS- |
GA-Net bus communication signal |
| D2 |
SH GA BUS |
Shield for terminals No. 1 and No. 7 |
| D3 |
GA AUDIO L- |
Inputs sound signal from XM receiver |
| D4 |
GA AUDIO R- |
Inputs sound signal from XM receiver |
| D5 |
SH GA AUDIO |
Shield for terminals No. 3, No. 4, No. 9, and No. 10 |
| D6 |
GA GND |
GA-Net related units ground |
| D7 |
GA BUS+ |
GA-Net bus communication signal |
| D8 |
GA SYS ON |
Output signal for GA-Net related units switching on/off |
| D9 |
GA AUDIO L+ |
Inputs sound signal from XM receiver |
| D10 |
GA AUDIO R+ |
Inputs sound signal from XM receiver |
| D11 |
Not used |
--- |
| D12 |
GA+B |
Outputs power source for GA-Net related units |
AUDIO-NAVIGATION UNIT CONNECTOR E (3P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| E1 |
SWD +B |
Power source for AM/FM antenna |
| E2 |
AM/FM |
Inputs AM/FM signal |
| E3 |
SH (AM/FM) |
Shield for terminal No. 2 |
AUDIO-NAVIGATION UNIT CONNECTOR F (5P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| F1 |
USB GND |
Ground for communication signal |
| F2 |
USB VBUS |
Outputs power source for USB port A |
| F3 |
USB DATA+ |
Communication signal |
| F4 |
USB DATA- |
Communication signal |
| F5 |
USB SH |
Shield for terminals No. 1, No. 2, No. 3, and No. 4 |
AUDIO-NAVIGATION UNIT CONNECTOR G (5P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| G1 |
USB GND |
Ground for communication signal |
| G2 |
USB VBUS |
Outputs power source for USB port B |
| G3 |
USB DATA+ |
Communication signal |
| G4 |
USB DATA- |
Communication signal |
| Cavity |
Terminal Name |
Description |
| G5 |
USB SH |
Shield for terminals No. 1, No. 2, No. 3, and No. 4 |
AUDIO-NAVIGATION UNIT CONNENTOR H (20P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| H1 |
T.M.D.S DATA2+ |
Inputs video/audio data signal |
| H2 |
T.M.D.S DATA2 SHIELD |
Shield for terminals No. 1 and No. 3 |
| H3 |
T.M.D.S DATA2- |
Inputs video/audio data signal |
| H4 |
T.M.D.S DATA1+ |
Inputs video/audio data signal |
| H5 |
T.M.D.S DATA1 SHIELD |
Shield for terminals No. 4 and No. 6 |
| H6 |
T.M.D.S DATA1- |
Inputs video/audio data signal |
| H7 |
T.M.D.S DATA0+ |
Inputs video/audio data signal |
| H8 |
T.M.D.S DATA 0 SHIELD |
Shield for terminals No. 7 and No. 9 |
| H9 |
T.M.D.S DATA0- |
Inputs video/audio data signal |
| H10 |
T.M.D.S CLOCK+ |
TMDS synchronous signal |
| H11 |
T.M.D.S CLOCK SHIELD |
Shield for terminals No. 10 and No. 12 |
| H12 |
T.M.D.S CLOCK- |
TMDS synchronous signal |
| H13 |
CEC |
HDMI control signal |
| H14 |
UTILITY |
Not used |
| H15 |
SCL |
I2C bus synchronous signal |
| H16 |
SDA |
I2C bus communication signal |
| H17 |
DDC, CEC GROUND |
Ground for HDMI control signal |
| H18 |
+5V POWER |
5 V power supply |
| H19 |
HOT PLUG DETECT |
Detects connection signal |
| H20 |
SHIELD |
Shield for all of terminals |
AUDIO-NAVIGATION UNIT CONNECTOR J (2P)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| J1 |
GPS ANT |
Inputs GPS signal |
| J2 |
GPS SH |
Shield for terminal No. 1 |