Navigation Display Unit Removal/Installation

SRS Components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove the center panel (see PASSENGER'S MIDDLE PANEL REMOVAL/INSTALLATION ).
Remove the screws from the navigation display unit (A).

Fig 1: Locating Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (A), and remove the navigation display unit (B).

Fig 2: Locating Connectors And Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the navigation display unit in the reverse order of removal.