Enable Conditions
| Condition | Minimum | Maximum |
|---|---|---|
| Low load duration time | 10 seconds | - |
| Engine coolant temperature [ECT SENSOR 1] before EVAP purge control starts*1 | 140 °F (60 °C) | - |
| Engine coolant temperature [ECT SENSOR 1] before EVAP purge control starts*2 | 122 °F (50 °C) | - |
| MAP value [MAP SENSOR] | - | -47 kPa (-13.8 inHg, -350 mmHg) |
| 12 volt battery voltage [BATTERY] |
10.5 V | - |
| Fuel trim | 0.73 | 1.47 |
| EVAP canister purge valve duty [EVAP PC DUTY] |
30 % | 80 % |
| Fuel feedback | Closed loop at stoichiometric | |
*1: 6-Speed A/T
*2: 9-Speed A/T
[ ]: HDS Parameter