How to Enter Neutral Position Holding Mode: Procedure

NOTE:

This function is automatically canceled after about 15 minutes from entering the neutral position holding mode.
When the negative terminal of the 12 volt battery is disconnected, the neutral position holding mode is canceled and the vehicle is shifted into P position.

Neutral Position Holding Mode - Enter

1. Park the vehicle on level ground, and block all four wheels.

2. Start the engine.

3. Shift the transmission to N position/mode while pressing the brake pedal.

4. Press and hold the N button again for 2 seconds.

NOTE:

Press the power switch if you want to stop the engine with the neutral position holding mode.