Transfer Assembly Fluid Replacement (9-Speed A/T): Replacement

Transfer Assembly Fluid - Replace

Fig 1: Transfer Assembly Fluid Bolt Replacement Components With Torque Specifications

Courtesy of HONDA, U.S.A., INC.

1. Remove the filler plug (A) with the sealing washer (B).

2. Remove the drain plug (C) with the sealing washer (D), and drain the transfer assembly fluid.

3. Reinstall the drain plug with a new sealing washer.

4. Refill the transfer assembly with the recommended fluid through the filler hole (E) until the fluid flows out. Use an Honda HGO- 1.

5. Reinstall the filler plug with a new sealing washer.

Transfer Assembly Fluid Capacity:
	0.43 L (0.45 US qt) at fluid change
	0.45 L (0.48 US qt) at overhaul