LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2017 >> Pilot EX-L, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System / Engine Mechanical - Service Information >> Removal And Installation >> EVAP Canister (KA/Kc) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Vehicle - Lift
  2. Rear wheels - Remove (AWD model)
  3. Exhaust Pipe and Muffler - Remove (AWD model)
  4. Propeller Shaft - Remove (AWD model)
  5. EVAP Canister Assembly - Remove
    Fig 1: EVAP Canister Assembly With Torque Specifications
    GHH308478Courtesy of HONDA, U.S.A., INC.
    1. AWD model: Place a transmission jack (A) under the rear differential (B).

    2. AWD model: Remove the rear differential rear mount bolt (C) and the rear differential front mounting bracket bolts (D).

    3. AWD model: Lower the transmission jack and rear differential about 1.18 in (30 mm).

    NOTE:  Be careful not to damage the connecting parts.
    GHH308479Courtesy of HONDA, U.S.A., INC.
    		 4. Disconnect the quick-connect fitting

    (A) and the hoses (B).

    5. Disconnect the connectors (C).
    GHH308480Courtesy of HONDA, U.S.A., INC.
    		 6. Remove the EVAP canister assembly (A) from the front side.
  6. EVAP Canister - Disassembly
    GHH308481Courtesy of HONDA, U.S.A., INC.
    		 1. Remove the EVAP canister vent shut valve (A).

    2. Remove the FTP sensor 

    (B).
  7. All Removed Parts - Install
    1. Install the parts in the reverse order of removal with new O-rings.
scientia non olet · About LEMON Manuals