Crankshaft And CKP Pulse Plate: Removal
- Engine/Transmission - Remove - Refer to:
ENGINE (6-Speed A/T) ('16-'18 9-Speed A/T) - Removal and Installation or
ENGINE (9-Speed A/T) (2019 2020 2021) - Removal and Installation .
- Transmission - Remove - Refer to:
Automatic Transmission - Removal and Installation (6-Speed A/T) or
Automatic Transmission - Removal and Installation (9-Speed A/T) .
- Drive Plate - Remove - Refer to: Drive Plate (9-Speed A/T) (2019 2020 2021) - Removal and Installation
.
Drive Plate (6-Speed A/T) ('16-'18 9-Speed A/T) - Removal and Installation or
Drive Plate (9-Speed A/T) (2019 2020 2021) - Removal and Installation .
- Cylinder Head - Remove - Refer to:
Cylinder Head (6-Speed A/T), ('16-'18 9-Speed A/T) - Removal and Installation or
Cylinder Head (9-Speed A/T) (2019 2020 2021) - Removal and Installation, .
- Oil Pan - Remove
- Oil Strainer and Oil Pump - Remove
- Baffle Plate - Remove
- Engine Block End Cover - Remove
- Piston/Connecting Rod Assembly - Remove
- Main Bearing Cap - Remove
Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.
1. Loosen the bearing cap bolts and the bearing cap side bolts in sequence 1/3 turn at a time; repeat the sequence until all bolts are loosened. 2. Remove the bearing cap bolts (A) and the bearing cap side bolts (B), then remove the main bearing caps (C). - Crankshaft - Remove
1. Lift the crankshaft (A) out of the engine block, being careful not to damage the journals and the CKP pulse plate (B). 2. Remove the thrust washers (C).
3. Reinstall the main bearing caps and bearings on the engine block in the proper order.
- CKP Pulse Plate - Remove
1. Clean the crankshaft oil passages with pipe cleaners or a suitable brush. 2. Check the keyway slot and the threaded holes for damage.
3. Remove the CKP pulse plate.
NOTE: Be careful not to damage the journals and the CKP pulse plate.