Power Mirror Control Unit Connector for Inputs and Outputs (2017 2018 2019 2020)
POWER MIRROR CONTROL UNIT 24P CONNECTOR (female terminals)
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 1 | IG1 METER | IG1 power source | With vehicle in ON or START mode: about battery voltage |
| 2 | SVCC | Drives power mirror position sensor | With power mirror control unit in wake-up mode: about 5 V |
| 3 | R/C MIRR MTR (L-UD) | Detects power mirror switch signal | With vehicle in ON mode: about 0 V or 5 V (depending on power mirror switch position) |
| 4 | R-UD | Detects power mirror switch signal | With power mirror selector switch in R position: less than 0.2 V |
| 5 | R-LR | Detects power mirror switch signal | With power mirror selector switch in R position: less than 0.2 V |
| 6 | SEL | Detects power mirror switch signal | With power mirror selector switch in L position: less than 0.2 V |
| 7 | SCOM | Ground for power mirror position sensor | Less than 0.2 V at all times |
| 8 | SEV | Detects left mirror position sensor (vertical) signal | About 0 - 5 V (depending on power mirror vertical position) |
| 9 | SEH | Detects left mirror position sensor (horizontal) signal | About 0 - 5 V (depending on power mirror horizontal position) |
| 10 | R/C MIRR MTR (R-UD) | Drives right power mirror actuator | With right power mirror actuator tilt UP: about battery voltage With right power mirror actuator tilt DOWN: less than 0.2 V |
| 11 | R/C MIRR MTR (L-LR) | Detects power mirror switch signal | With power mirror selector switch in L position: less than 0.2 V |
| 12 | R/C MIRR MTR (L-COM) | Detects power mirror switch signal | With power mirror selector switch in L position: less than 0.2 V |
| 13 | +B BACKUP | +B power source | About battery voltage at all times |
| 14 | --- | Not used | --- |
| 15 | GND | Power mirror control unit ground | Less than 0.2 V at all times |
| 16 | SER | Detects power mirror switch signal | With power mirror selector switch in R position: less than 0.2 V |
| 17 | RSEH | Detects right mirror position sensor (horizontal) signal | About 0 - 5 V (depending on power mirror horizontal position) |
| 18 | RSEV | Detects right mirror position sensor (vertical) signal | About 0 - 5 V (depending on power mirror vertical position) |
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 19 | R/C MIRR MTR (R-LR) | Drives right power mirror actuator | With right power mirror actuator swing RIGHT: about battery voltage With right power mirror actuator swing LEFT: less than 0.2 V |
| 20 | R/C MIRR MTR (R-COM) | Drives right power mirror actuator | With right power mirror actuator swing RIGHT or tilt UP: less than 0.2 V With right power mirror actuator swing LEFT or tilt DOWN: about battery voltage |
| 21 | MH | Drives left power mirror actuator | With left power mirror actuator swing RIGHT: about battery voltage With left power mirror actuator swing LEFT: less than 0.2 V |
| 22 | MCOM | Drives left power mirror actuator | With left power mirror actuator swing RIGHT or tilt DOWN: less than 0.2 V With left power mirror actuator swing LEFT or tilt UP: about battery voltage |
| 23 | MV | Drives left power mirror actuator | With left power mirror actuator tilt DOWN: about battery voltage With left power mirror actuator tilt UP: less than 0.2 V |
| 24 | UART (DPMS) | Communication line | --- |