LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2018 >> Fit EX-L >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Calibration With Multi-Information Display
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibration With Multi-Information Display

  1. Make sure the tires are inflated to the specified tire pressure listed on the doorjamb label.
  2. Turn the vehicle to the ON mode.
    NOTE: Vehicle must be stopped with the transmission in neutral (M/T) or P or N (A/T, CVT).
  3. Press and hold the INFORMATION button (A) to enter the VEHICLE SETTINGS mode. See Fig 1.
  4. Press the SEL/RESET button (B) to select TPMS CALIBRATION.
  5. When calibration successfully begins, "Calibration Started" is displayed on the Multi-Information display (C) when the system received the calibration.
NOTE: If the calibration does not begin successfully, "Calibration Failed to Start" is displayed on the Multi-information display. See appropriate manufacturer service information.
Fig 1: Identifying TPMS Button & Information Display Indicator
G00561421Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals