Power Window Master Switch Connector for Inputs and Outputs

Power Window Master Switch 37P Connector (female terminals)

Courtesy of HONDA, U.S.A., INC.

Power Window Master Switch 37P Connector (female terminals)

Terminal number	Terminal name	Description	Signal
1	P/W DR MTR DOWN	Drives driver's power window motor	When driver's power window motor DOWN operation: about battery voltage If none of above conditions are met: less than 0.2 V
2	P/W DR MTR UP	Drives driver's power window motor	When driver's power window motor UP operation: about battery voltage If none of above conditions are met: less than 0.2 V
3	GND	Ground for power window master switch	Less than 0.2 V at all times
4	+B P/W DR	Power source for door multiplex control unit	About battery voltage at all times
5	DR MEMORY SEAT SW POS1	Detects DR MEMORY SEAT SW POS1 signal	With driving position memory switch 1 released: about battery voltage With driving position memory switch 1 pressed: less than 0.2 V
6	DR MEMORY SEAT SW POS2	Detects DR MEMORY SEAT SW POS2 signal	With driving position memory switch 2 released: about battery voltage With driving position memory switch 2 pressed: less than 0.2 V
7	DR KEY CYL LOCK	Detects DR KEY CYL LOCK signal	With driver's door key cylinder switch UNLOCK: about battery voltage With driver's door key cylinder switch LOCK: less than 0.2 V
8	DR KEY CYL UNLOCK	Detects DR KEY CYL UNLOCK signal	With driver's door key cylinder switch LOCK: about battery voltage With driver's door key cylinder switch UNLOCK: less than 0.2 V
9	TRUNK OPEN SW(INTR)	Detects TRUNK OPEN SW (INTR) signal	With trunk lid opener switch released: about battery voltage With trunk lid opener switch pressed: less than 0.2 V
10	MIRROR R COM	Detects MIRROR R COM signal	With vehicle in ON mode: 0 V or 12 V (depending on power mirror switch position)
11	MIRROR R LR	Detects MIRROR R LR signal	With vehicle in ON mode: 0 V or 12 V (depending on power mirror switch position)
12	MIRROR UD	Detects MIRROR UD signal	With vehicle in ON mode: 0 V or 12 V (depending on power mirror switch position)
13	Not used	---	---
14	Not used	---	---
15	H/MIRROR	Drives left power mirror defogger	With power mirror defogger ON: about battery voltage
16	Not used	---	---
17	DR MEMORY SEAT SW MEMORY	Detects DR MEMORY SEAT SW MEMORY signal	With driving position memory set switch released: about battery voltage With driving position memory set switch pressed: less than 0.2 V
18	IG2 OPTION	IG2 power source	With vehicle in ON mode: about battery voltage
19	Not used	---	---
20	DR SILCON UNLOCK	Detects DR SILCON UNLOCK signal	With driver's door lock knob switch LOCK: about battery voltage With driver's door lock knob switch UNLOCK: less than 0.2 V
21	DR SILCON LOCK	Detects DR SILCON LOCK signal	With driver's door lock knob switch UNLOCK: about battery voltage With driver's door lock knob switch LOCK: less than 0.2 V
22	DR MEMORY SEAT SW IND1	Outputs DR MEMORY SEAT SW IND1 signal	Indicator 1 ON: pulse (depending on indicator brightness) Indicator 1 OFF: less than 0.2 V
23	Not used	---	---
24	DR MEMORY SEAT SW IND2	Outputs DR MEMORY SEAT SW IND2 signal	Indicator 2 ON: pulse (depending on indicator brightness) Indicator 2 OFF: less than 0.2 V
25	Not used	---	---
26	Not used	---	---
27	Not used	---	---
28	Not used	---	---
29	GND	Ground for power window master switch	Less than 0.2 V at all times
30	P/W SW ILLUMI	Outputs P/W SW ILLUMI signal	With parking lights are ON: pulse (depending on indicator brightness) With parking lights are OFF: less than 0.2 V
31	B-CAN_L	Communication line	---
32	B-CAN_H	Communication line	---
33	P/W DR MTR PLSA	Detects P/W DR MTR PLSA signal	---
34	P/W DR MTR VCC	Outputs P/W DR MTR VCC signal	With door multiplex control unit is wakeup mode: about battery voltage With door multiplex control unit is sleep mode: less than 0.2 V
35	P/W DR MTR PLSB	Detects P/W DR MTR PLSB signal	---
36	LIN(P/W)	Communication line	---
37	+B BACK UP	Power source for power window master switch	About battery voltage at all times