DTC Troubleshooting: P1DD9 (1012) (Generator Motor Control Module)

DTC P1DD9  : VCU I1 Current Sensor Circuit (Generator Motor Control Module Detected)

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P1DD9 VCU I1 Current Sensor Circuit (Generator Motor Control Module Detected)

   Is DTC P1DD9 indicated?

   YES 

   Check for any authorized service information related to the DTC(s) or symptoms you are troubleshooting or substitute a known-good PCU .

   NO 

   Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.