Alternator Performance Test
Special Tools Required
Honda 12 Volt Battery Diagnostic Station (GR8): Model Number MTRGR81100P*
*: Available through the Honda Tool and Equipment Program 888-424-6857
- PGM-FI system DTC check:
- 1. Connect the HDS to the DLC - Refer to: How to Troubleshoot the Fuel and Emissions Systems or How to Troubleshoot the CVT System(CVT) .
- 2. Turn the vehicle to the ON mode.
- 3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC Circuit Troubleshooting .
- 4. Check for PGM-FI system DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame Are any DTCs indicated?
YES
Go to the indicated DTC's troubleshooting.
NO
Go to step 2.
- Alternator Test:
- 1. Jump the SCS line with the HDS.
SCS Short
- 2. Test the alternator with the Honda 12 volt battery diagnostic station (GR8).
NOTE: For setup, customization, and other available features, refer to the GR8 user's manual.
Is the result OK?
YES
Intermittent failure, the system is OK at this time.
NO