Rocker Arm Assembly Removal and Installation (2.4 L Engine) (2017 2018 2019): Installation

NOTE: Where icon is shown continue to the information below.

Courtesy of HONDA, U.S.A., INC.

Detailed information, notes, and precautions

Rocker Arm Assembly - Reassemble

1. If the rocker arm assembly is disassembled, reassemble the rocker arm assembly .

Rocker Arm Assembly - Install

1. Apply liquid gasket to the cylinder head mating surface of the No. 5 rocker shaft holder and to the inside edge of the threaded bolt holes.

2. Install the lost motion assembly in the cylinder head.

NOTE: Apply new engine oil to the lost motion assembly.

3. Install the rocker arm assembly on the cylinder head.