Heated Steering Wheel Control Unit Connector for Inputs and Outputs

Heated Steering Wheel Control Unit 14P Connector (female terminals)

Courtesy of HONDA, U.S.A., INC.

Terminal number	Terminal name	Description	Signal
1	HSW HEATER	Outputs heated steering wheel signal	With heated steering operation: pulse (depending on steering temperature)Without heated steering wheel operation: less than 0.2 V
2	+B HSW	Detects heated steering wheel relay signal	With vehicle in ON mode: about battery voltage
3	---	Not used	---
4	---	Not used	---
5	HSW SW	Detects heated steering wheel switch signal	With vehicle in ON mode and heated steering wheel switch ON: about battery voltageIf none of above conditions are met: less than 0.2 V
6	NTC TH+	Detects heater temperature signal	---
7	NTC TH-	Detects heater temperature signal	---
8*	HSW LIN	Communication line	---
9	---	Not used	---
10	HSW IND	Detects heated steering wheel switch indicator signal	---
11	---	Not used	---
12*	STRG GND	Heated steering wheel control unit ground	Less than 0.2 V at all times
13	---	Not used	---
14	HSW SW +B	Drives heated steering wheel switch	With vehicle in ON mode: about battery voltage

*: With multi-information display