DTC P0016
DTC P0016 : CMP Sensor A and CKP Sensor Correlation
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If DTC P0335 and/or P0339 are stored at the same time as DTC P0016, troubleshoot those DTCs first, then recheck for DTC P0016.
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P0016 CMP Sensor A and CKP Sensor Correlation |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
Clear DTC
-3. Start the engine.
-4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P0016 CMP Sensor A and CKP Sensor Correlation Is DTC P0016 indicated?
YES
The failure is duplicated. Go to step 2.
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the CKP sensor, CMP sensor A, and the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .
- CKP sensor and CMP sensor A installation check
-1. Turn the vehicle to the OFF (LOCK) mode.
-2. Check that the CKP sensor and CMP sensor A are installed correctly.
Are the CKP sensor or CMP sensor A installed correctly?
YES
Installation is OK. Go to step 3.
NO
Installation is not correct, reinstall the CKP sensor and/or CMP sensor A.
- CMP pulse plate A visual check
-1. Remove CMP sensor A , and check for damage to CMP pulse plate A.
Is the pulse plate damaged?
YES
NO
Go to step 4.
- Camshaft timing check
-1. Check the camshaft timing .
Is the camshaft timing OK?
YES
Go to step 5.
NO
- Cam chain check
-1. Check for damage or stretch at the cam chain .
Is the cam chain damaged or stretched?
YES
Replace the cam chain and the cam chain auto-tensioner .
NO
Go to step 6.
- CKP sensor check
-1. Substitute a known-good CKP sensor .
-2. Reconnect all connectors.
-3. Turn the vehicle to the ON mode.
-4. Clear the DTC with the HDS.
Clear DTC
-5. Start the engine.
-6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P0016 CMP Sensor A and CKP Sensor Correlation Is DTC P0016 indicated?
YES
The CKP sensor is OK. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM , then recheck. If DTC P0016 goes away and the PCM was substituted, replace the original PCM .
NO