Cannot select ON mode with keyless access and with the keyless remote touching the power switch

Diagnostic procedure

• Symptom troubleshooting 

Also check for

• Check the No. B1 , No. B2-3 , No. B3-3 , No. B3-4 , and No. B21 fuses
• Check the No. D3 fuse
• Poor connections at the body control module
• +B P-ACT DRV line open
• GND line open/short or poor ground
• SS1(+) line open/short
• SS2(-)line open/short
• TCU WAKE UP line open/short
• IGNTRX line open/short
• L-line
• Keyless remote
• Body control module
• Harness/connectors
• Power switch