Keyless Access System - Security indicator blinks
Security indicator blinks
- Keyless access system check 1
-1. Select KEYLESS ACCESS CONTROL UNIT from the ONE-PUSH START system select menu with HDS, and enter KEYLESS ACCESS SYSTEM INFORMATION.
One-Push - KEYLESS ACCESS CONTROL UNIT - SYSTEM CHECK1 1
Do the SYSTEM CHECK 1 with the HDS.
Is N-1 OK indicated?
YES
Go to step 2.
NO
Troubleshoot the keyless access system according to the result of the SYSTEM CHECK 1.
- Keyless access system check 2
-1. With driver's power window open and all the doors closed, turn the vehicle to the OFF (LOCK) mode.
-2. Remove all the keyless remotes from inside the vehicle. Hold them outside the open driver's window, at least 8.0 in (20 cm) away from the vehicle.
-3. Press the power switch button. The MID should request the keyless remote to touch the power switch button. The LED on the power switch will flash for up to 30 seconds.
-4. Touch the power switch with the keyless remote. The buttons on the keyless remote should be facing you. The LED on the power switch will turn solid when detected.
-5. Turn the vehicle to the ON mode.
-6. Select BACKUP CONTROL UNIT from the ONE-PUSH START system select menu with the HDS, and enter SYSTEM INFORMATION.
One-Push - KEYLESS ACCESS CONTROL UNIT - SYSTEM CHECK1 1
Do the SYSTEM CHECK with the HDS.
Is N-1 OK indicated?
YES
Go to step 3.
NO
Troubleshoot the keyless access system according to the result of the SYSTEM CHECK.
- Gauge control module check
-1. Select GAUGES from the BODY ELECTRICAL SYSTEM SELECT menu with the HDS.
-2. Select FUNCTIONAL TESTS from the TEST MODE menu with the HDS, and enter SELF TEST.
Does the security indicator blinking?
YES
Go to the PGM-FI system troubleshooting.
NO