DTC Troubleshooting: P062F (308) (Generator Motor Control Module)

DTC P062F  : Generator Motor Control Module EEPROM Error

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, and wait 30 seconds.

   -4. Turn the vehicle to the ON mode.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P062F Generator Motor Control Module EEPROM Error

   Is DTC P062F indicated?

   YES 

   Check for any authorized service information related to the DTC(s) or symptoms you are troubleshooting or substitute a known-good PCU .

   NO 

   Intermittent failure. The system is OK at this time. Check for poor connections or loose terminals at the PCU. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.