DTC Troubleshooting: P1DED (584) (Generator Motor Control Module)

DTC P1DED  : VCU I1 Current Sensor 2 Circuit Low (Generator Motor Control Module Detected)

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P1DED VCU I1 Current Sensor 2 Circuit Low (Generator Motor Control Module Detected)

   Is DTC P1DED indicated?

   YES 

   Check for any authorized service information related to the DTC(s) or symptoms you are troubleshooting or substitute a known-good PCU .

   NO 

   Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.