DTC U0111
DTC U0111 : EPP-CAN Malfunction (PCM-Battery Condition Monitor Module)
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If DTC U0111 is indicated alone, do the troubleshooting for DTC U1206 using the on-board snapshot for U0111.
- If any of the DTCs listed below are indicated at the same time as DTC U0111, troubleshoot those DTCs first, then recheck for U0111.
-
- U1206: Battery condition monitor module
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| U0111 EPP-CAN Malfunction (PCM-Battery Condition Monitor Module) |
DTC (PGM-FI)
- DTC check
-1. Turn the vehicle to the ON mode.
-2. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC U0111 EPP-CAN Malfunction (PCM-Battery Condition Monitor Module) U1206 EPP-CAN Malfunction (PCM-Battery Condition Monitor Module) DTC (PGM-FI)
Are DTC U1206 and U0111 indicated at the same time?
YES
Go to the indicated DTC's troubleshooting.
NO
Go to the troubleshooting for DTC U1206 using the on-board snapshot for DTC U0111.