DTC U0416-68 (EPS Control Unit)

DTC U0416-68  : VSA System Malfunction

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC is stored by VSA system malfunction. If the VSA indicator is on, troubleshoot the VSA system first.

DTC (EPS)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then the READY TO DRIVE mode.

   -4. Wait for 60 seconds or more.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   U0416-68 VSA System Malfunction

   Is DTC U0416-68 indicated?

   YES 

   The failure is duplicated. Go to VSA system troubleshooting .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.